Editing The Name Of A V-Take - Zoom MRS-1044 Operation Manual

Using V-takes
• BOUxx-yy: A V-take recorded using the Bounce
function
* xx will be the track number (1 – 10), and yy will be the V-
take number (1 – 10).
H
INT
If an unrecorded V-take is selected, the V-take name area
will indicate "NO DATA."
4.
When you have finished switching V-takes, press
the [EXIT] key.
The [V-TAKE] key will go dark, and you will return to the
main screen.

Editing the name of a V-take

A V-take that has been recorded will be automatically
assigned a default name, but you can edit this V-take name
as follows.
1.
In the main screen, press the [V-TAKE] key.
A screen will appear in which you can switch the V-take of
each track.
E R
2.
Use the cursor [ ]/[
status keys) to select the track (1 – 10) for which
you want to edit the name of a V-take.
For details on how to select a track, refer to p.35.
H
INT
• It is not possible to edit the name of an unrecorded V-
take (NO DATA).
• The V-take name can be edited only for the V-take that is
currently selected for each track 1 – 10.
3.
Press the [EDIT] key.
The first character of the V-take name will blink.
E R
4.
Use the cursor [ ]/[
location, and turn the dial to change the character.
The following characters can be selected.
Numerals: 0 – 9
Letters: A – Z, a – z
! " # $ % & ' ( )
Symbols: (space)
> ? @ [ \ ] ^ _ { } ˜
36
] keys and the dial (or the
] keys to move the blinking
+ , - . / : ; < =
5.
When you have finished inputting the name, press
the [EXIT] key.
The name will be updated, and you will return to the screen
of step 2. If necessary, you can now edit the V-take name of
another track.
6.
When you have finished editing, press the [EXIT]
key.
You will return to the main screen.
H
INT
If all recorded data is erased from a V-take, the name will
revert to "NO DATA."
ZOOM MRS-1044