Editing Patches - Zoom R8 Operation Manual

Editing patches

You can change effect types and adjust effect parameters to create your own patches.
1
Press
Accessing the effect settings
Press
select an insert effect.
Press
select a reverb send-return effect.
Press
select a chorus/delay send-return effect.
2
Select ON/OFF and set it to On.
3
Select an algorithm and patch.
4
Select EDIT.
84
beneath to
beneath to
beneath to
Change menu
Change setting
Change menu
Change setting
Change menu
Press
Editing effect modules
5
Turn the effect type On to edit it.
Effect module (TYPE) Off
Effect module (TYPE) on
Selecting effect modules
6
Select the effect module.
Adjust the patch level
(final patch volume)
7
Select the TOTAL effect
module.
8
Select PATCH LVL and set the value.
Return to the main effect
9
screen.
Press
Press ENTER or the
ON/OFF soft key to
turn the module on or
off.
Effect type
E: Edit mark shown when
a patch has been edited
or changed
Change module
Change module
Change menu
Change value