Set Speed Mode Operation; Set Subsystem Time Operation - HP XP20000/XP24000 Reference Manual

Set Speed Mode Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Speed Mode,,Normal end,,,Seq.=xxxxx
+CHA=CHA-1E
++{Port Block,Mode}=[{A,High Speed},{B,High Speed}Num. of Blocks=2
+CHA=CHA-1H
++{Port Block,Mode}=[{A,Standard},{B,High Speed}],Num. of Blocks=2
+Num. of CHAs=2
[Install]
Install function
Set Speed Mode
Set Speed Mode operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 153 Set Speed Mode Operation
Item
CHA
Port Block
Mode
Num. of Blocks
Num. of CHAs

Set Subsystem Time Operation

Example 1 (The case of TOD Change)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Subsystem Time,TOD Change,
Normal end,,,Seq.=xxxxx
+Time=YYYY/MM/DD HH:mm:SS
Example 2 (The case of Synchro. Infor.)
For IPv4
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Subsystem Time,Synchro. Infor.,
Normal end,,,Seq.=xxxxx
+{Use Synchro.,SNTP IP,SNTP Port,Time Zone,Check Time}={Valid,(123.456.789.123),100,
Tokyo Standard Time,24}
For IPv6
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Subsystem Time,Synchro. Infor.,
Normal end,,,Seq.=xxxxx
+{Use Synchro.,SNTP IP,SNTP Port,Time Zone,Check Time}
={Valid,(1111.1111.1111.1111.AAAA.AAAA.AAAA.AAAA),100,
Tokyo Standard Time,24}
[Install]
Install function
Set Subsystem Time
Set Subsystem Time operation
TOD Change and Synchro. Infor
TOD Change is the selected parameter for example 1, and Synchro. Infor is the selected parameter
for example 2. This operation uses the following parameters, as shown in
Description
The CHA name (name of channel adapter).
The port block. Port blocks A and B are output.
The mode set to the port.
Standard: Standard mode. High Speed/MIX: High speed mode/Mix mode.
The number of port blocks in the channel adapter.
The number of channel adapters that the mode is changed.
Table 153 (page 139).
Table 154 (page
Set Speed Mode Operation 139
140).