[Install] Set Subsystem Time; [Install] Set Userauth - HP StorageWorks P9000 - Disk Arrays Reference Manual

[Install] Set Subsystem Time

Example 1: The case of TOD Change
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Subsystem Time,TOD Change,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Time=YYYY/MM/DD HH:mm:SS
Example 2: The case of Synchro. Infor.
For IPv4
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Subsystem Time,Synchro. Infor.,Normal end,
xxx:xxx:xxx:xxx,,Seq.=xxxxxxxxxx
+{Use Synchro.,SNTP IP,SNTP Port,Time Zone,Check Time}
={Valid,(123.456.789.123),100,Tokyo Standard Time,24}
For IPv6
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Subsystem Time,Synchro. Infor.,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Use Synchro.,SNTP IP,SNTP Port,Time Zone,Check Time}
={Valid,(1111.1111.1111.1111.AAAA.AAAA.AAAA.AAAAA),100,
Tokyo Standard Time,24}
Basic Information
Parameter
TOD Change
Synchro. Infor.
Detailed Information
Item
Time
Use Synchro.
SNTP IP
SNTP Port
Time Zone
Check Time

[Install] Set UserAuth

Example
07xx, YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set UserAuth,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,UserAuth}=[{0xXX:0xXX:0xXX,Enable}],
Num. of LDEVs=1
Description
The date and the time.
The setting of time correction function.
Description
Indicates the date and the time in the format of "YYYY/MM/DD HH:mm:SS".(YYYY: year,
MM: month, DD: date, HH: hour, mm: minute, SS: second).
Indicates whether the time correction function is valid or invalid.
Valid: Enable, Invalid: Disable
The IP address (IPv4 or IPv6) of SNTP server.
The port used by SNTP server.
The time zone.
The time when the time correction function is executed. Only HH (Hour: 00 to 23) is indicated
for the execution time.
[Install] Cache Residency Prestaging 81