Mechanical Adjustment; Tension Regulator Operating Position Adjustment - Sony Digital Betacam DVW-707 Maintenance Manual

4-3. Mechanical adjustments

4-3. Mechanical Adjustment

4-3-1. Tension Regulator Operating Position Adjustment

Note
When replacing the S brake assembly or S reel table assembly, be sure to carry out tension regulator operat-
ing position adjustment.
Preparations
1. Check that the unit is in the unthreading end mode.
2. Remove the front lid and the outside panel. (Refer to section 1-6 of Maintenance Manual Part 1.)
3. Remove the cassette compartment. (Refer to section 1-8 of Maintenance Manual Part 1.)
n
The tension regulator operating position check can be carried out when the cassette compartment is attached
to the unit.
Tools
. Torque screwdriver bit (for M2) : J-6325-380-A
. Torque screwdriver (for 3 kg)
: J-6325-400-A
4-118
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1