Sony Digital Betacam DVW-707 Maintenance Manual page 34

2-1. Service Mode
No. Page Item
26 LEVEL 9 MATRIX
MATRIX TABLE
DETECT COLOR
AXIS NUMBER
SATURATION
HUE
MATRIX AREA
IND.
MATRIX (MULTI)
27 LEVEL 10 MATRIX
MATRIX TABLE
R-G
R-B
G-R
G-B
B-R
B-G
MATRIX (MASTER)
28 LEVEL 11 H PHASE
SC PHASE
SC 0/180 SEL.
SC-H
29 LEVEL 12 IRIS SET
IRIS MODE
IRIS WEIGHT
IRIS SPEED
CLIP HIGH LIGHT
2-10
Setup Description
ON/[OFF] Turns ON/OFF the matrix correction function.
[A]/B
Selects the matrix table. (Two status of A and B can be saved.)
(Same as the MATRIX TABLE on page 10 of LEVEL.)
[OFF]/EXEC
Sets this item to the EXEC position to detect color of multi matrix.
(Align the VF gate marker to any of the color area that is divided
into 16 divisions in the direction of hue, and press the rotary encoder.)
[B]/B+/MG_/MG/ Select the desired hue to be corrected.
MG+/R/R+/YL_/
YL/YL+/G_/G/G+/
CY/CY+/B_
X ([0]) Set the range in which multi matrix correction works.
X ([0]) Set the hue in which multi matrix correction works.
ON/[OFF] Turns ON/OFF the function of indicating zebra pattern on the VF
screen indicating the multi matrix correction detect area.
[ON]/OFF
Selects wheather the matrix correction values set on this page are
valid or not.
ON/[OFF] Turns ON/OFF the linear matrix correction function.
(Same as MATRIX on the FUNCTION 1/2 pages.)
[A]/B
Selects the matrix table. (Two status of A and B can be saved.)
X ([0]) Sets the matrix coefficient.
X ([0])
X ([0])
X ([0])
X ([0])
X ([0])
[ON]/OFF
Selects wheather the matrix coefficient set on this page is valid
or not.
X ([0]) Adjust the camera H phase during external sync lock mode.
X ([0]) Adjust the camera subcarrier phase during external sync lock mode.
0/180 ([0]) Inverts the SC phase of the camera in the external genlock mode.
X ([0]) Set the SC-H phase.
X ([0]) Sets the auto iris reference level.
Sets sensitivity of AUTO iris. + (PEAK)
X ([0])
[0]/1/2/3/4
Sets the valid range of the auto iris.
Note : The area shown by oblique lines are weighted during
AUTO iris mode.
0/1/[2]/3/4/5 Set the response speed of AUTO iris in the range of
0 (fast) 5 (slow).
ON/[OFF] Limits the auto iris detection to 100% for the subject of high
brightness (video level: 100% or more)
_ (AVERAGE)
0 4
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1