Sony Digital Betacam DVW-707 Maintenance Manual page 115

Removal
1. Pinch Roller Removal
(1) Loosen the center screw of the pinch roller.
Lift just above and remove the pinch roller.
(2) Remove the screw from the pinch roller.
Installation
2. Install Shaft Cleaning
Clean a pinch roller install shaft using a cleaning
cloth moistened with cleaning fluid.
3. Pinch Roller Installation
Attach the pinch roller to the pinch roller install
shaft after the white-marked side is above. Tighten
the screw removed in step 1.
4. Pinch Roller Cleaning
Clean the surface of the pinch roller using a clean-
ing cloth moistened with cleaning fluid.
Adjustments After Replacement
5. Tape Running Adjustment
(Refer to section 5-1.)
6. CUE Head Height Adjustment
(Refer to section 5-5.)
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
Pinch roller
White-marks
Pinch roller install shaft
(cleaning)
4-2. Parts Replacement
M 1.4x2.5
T reel table
4-31