Sony Digital Betacam DVW-707 Maintenance Manual page 93

Removal
1. Brush Cover Removal
(1) Disconnect the connector on the brush assem-
bly board.
(2) Remove the two screws and the brush cover.
2. Brush Assembly Removal
(1) Remove one of the screws which secures the
brush base.
(2) Loosen the other screw and move the brush
base in the direction of the arrow.
In this way the brush and slip ring will release.
(3) Remove the screw and the brush assembly.
n
Never touch the brush.
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
P 2x2
Brush cover
Slip ring
Brush
4-2. Parts Replacement
Brush assembly
Connector
Remove the screw first.
P 2x4
Brush base
4-9