Sensor (A) Detection Pin Replacement - Sony Digital Betacam DVW-707 Maintenance Manual

4-2-18. Sensor (A) Detection Pin Replacement

Overviews
Replacement
Sensor Cover (A) Removal
Detection Pins Installation
Sensor Cover (A) Installation
Operation Check
Preparations
1. Turn the power off.
2. Remove the front lid and the outside panel. (Refer to section 1-6 of Maintenance Manual Part 1.)
m
. The detection pins for the sensor cover (A) can be replaced when the cassette compartment is attached to
the unit.
. If removing the cassette guide, the replacement will be easy.
Removal
1. Sensor Cover (A) Removal
While holding the position shown in the figure us-
ing a pair of tweezers (or equivalent), remove the
sensor cover (A) in the direction of the top.
In this way the detection pins are removed.
DVW-790WS/709WS/707 P2V1
DVW-790WSP/709WSP/707P P2V1
Sensor cover (A)
Detection pins
T reel table
4-2. Parts Replacement
S reel table
Detection pins
4-81