T Soft Brake Assembly Replacement - Sony Digital Betacam DVW-707 Maintenance Manual

4-2-9. T Soft Brake Assembly Replacement

Overviews
Replacement
T Soft Brake Assembly Removal
T Reel Table Cleaning
T Soft Brake Assembly Installation
Adjustment after replacement
Brake Torque Check
Note
If the tape has some hunting and slack when rewinding, replace the T soft brake assembly.
Preparations
1. Check that the unit is in the unthreading end mode.
2. Turn the power off.
3. Remove the front lid and the outside panel. (Refer to section 1-6 of Maintenance Manual Part 1.)
4. Remove the cassette compartment. (Refer to section 1-8 of Maintenance Manual Part 1.)
n
The stop washer has been used together with the T soft brake assembly when attaching the T soft brake
assembly. When replacing the T soft brake assembly, prepare a new stop washer (3-726-829-01 or 3-559-
408-11) and use it when attaching the T soft brake assembly.
Tools
. Stop washer fastening tool : J-6323-530-A
. Cleaning cloth
. Cleaning fluid
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
: 3-184-527-01
: 9-919-573-01
4-2. Parts Replacement
4-41