Shutter Switch - Sony Digital Betacam DVW-707 Maintenance Manual

3-3-4. Shutter Switch

1. Remove the front assembly. (Refer to "3-2-1.
Replacing CCD unit".)
2. Remove the two precision screws fixing the
lens connector and the three precision screws
to remove the front switch cover assembly.
3. Disconnect the harness from the connector
(CN10) on the SW-971 board.
4. Remove the two screws to remove the
SW-971 board.
5. Remove soldering from the shutter switch to
remove the switch from the SW-971 board.
6. Reattach the shutter switch by reversing the
removing steps.
n
Reattach the SW-971 board while the hole of
the front shield plate is positioned on the
back of the SW-971 board.
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
3-3. Replacing the External Connectors/Switches
Precision
P 2.6x5
Front switch cover assembly
Precision
P 2.6x5
Front switch cover assembly
Front shield plate
Front shield plate
S202
Front assembly
Shutter switch
CN10
SW-971 board
P 2.6x6
Hole
SW-971 board
3-21