Sony Digital Betacam DVW-707 Maintenance Manual page 74

3-3. Replacing the External Connectors/Switches
5. Removing the Connector
Refer to the following replacement procedure of
each connector depending on the connector.
Reattach the connector by reversing the removing
steps.
. AUDIO IN/AUDIO OUT connector
(1) Remove the six precision screws to remove
the AXM-21 board.
(2) Hold the cap of the board support with
tweezers and press it to shrink.
Remove the cap from the board opening to
remove the AXM-21 board.
(3) Remove soldering from the AUDIO IN/
AUDIO OUT connectors to remove them.
. DC IN connector
Remove the two precision screws to remove the
DC IN connector.
. DC OUT connector
(1) Remove the precision screw to remove the
DC OUT connector assembly.
(2) Remove the nut and washer, and then remove
the DC OUT connector from the DC OUT
stay.
3-18
AXM-21 board
(AUDIO IN, AUDIO OUT connectors)
Board
support
Connector box assembly
DC OUT connector
DC OUT stay
Washer
Nut
Connector box assembly
Precision P 2.6x5
Connector box assembly
Precision P 2.6x5
DC IN connector
Precision
P 2.6x5
DC OUT connector
assembly
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1