Sony Digital Betacam DVW-707 Maintenance Manual page 32

2-1. Service Mode
No. Page Item
20 LEVEL 3 SKIN TONE DTL
SUPPRESS LEVEL
SKIN TONE DET
SATURATION
HUE
WIDTH
SKIN AREA IND.
21 LEVEL 4 MASTER BLACK
MASTER GAMMA
MASTER BLACK
GAMMA
KNEE POINT
KNEE SLOPE
KNEE SATURATION
KNEE
WHITE CLIP
WHITE CLIP LEVEL
22 LEVEL 5 BURST LEVEL
BURST PHASE
R-Y
B-Y
R-Y LEVEL
B-Y LEVEL
R-Y LEVEL (4:3)
B-Y LEVEL (4:3)
23 LEVEL 6 RGB LEVEL
RGB SYNC LVL.
RGB SETUP LVL.
ENC Y LEVEL
ENC SYNC LVL.
ENC SETUP LVL.
RGB LEVEL (4:3)
ENC Y LEVEL (4:3)
2-8
Setup Description
ON/[OFF] Turns ON/OFF the skin tone detail function.
(Same as the TEST OUT on the 1/2 pages of FUNCTION.)
X([0]) Sets signal amount of the skin tone detail.
[OFF]/EXEC
Sets to the EXEC position when the range in which skin tone
detail function is automatically set.
(Shoot a skin tone object that fills the entire gate marker on VF,
and press the rotary encoder.)
X([0]) Sets the range of color saturation in which the skin tone detail
function works.
X([0]) Sets the range of color hue in which the skin tone detail function works.
X([0]) Sets the width of color hue in which the skin tone detail function works.
ON/[OFF] Turns ON/OFF the function of displaying zebra pattern on VF
indicating the range detecting the skin tone detail.
X([0]) Adjusts the master black level.
X([0]) Adjusts the master gamma correction curve.
X([0]) Adjusts the master black gamma.
It sets the rise-up of the gamma correction curve.
X([0]) Adjusts the master knee point level during MANUAL knee adjustment.
X([0]) Adjusts the master knee slope level during MANUAL knee adjustment.
X([0]) Adjusts the knee saturation level.
[ON]/OFF
Turns ON/OFF the knee correction function.
(The DCC switch setting is ignored.)
[ON]/OFF
Turns ON/OFF the white clip function.
(Used during video signal adjustment.)
Note : Video signal that exceeds the signal level of 109% or higher
shall not be output even when this setting is set to OFF.
X([0]) Sets the master white clip level.
X([0]) Sets the burst level of encoder output.
X([0]) Sets the burst phase of encoder output. (PAL only)
[ON]/OFF
Turns ON/OFF the function of outputting the R-Y signal to encoder output.
(This function is set to ON automatically when CHROMA is set ON
on 1/2 pages of FUNCTION.)
[ON]/OFF
Turns ON/OFF the function of outputting the B-Y signal to encoder output.
(This function is set to ON automatically when CHROMA is set ON
on 1/2 pages of FUNCTION.)
X([0]) Sets the R-Y level of encoder output.
X([0]) Sets the B-Y level of encoder output.
Note : The following items are displayed in DVW-790WS/790WSP/
709WS/709WSP only. The following items are valid when
the 16:9/4:3 MODE on the WIDE SCREEN page is set to 4:3.
X([0]) Turns ON/OFF the function of outputting the R-Y signal to encoder output.
X([0]) Turns ON/OFF the function of outputting the B-Y signal to encoder output.
X([0]) Sets the video signal level of the RGB output.
X([0]) Sets the sync signal level of the RGB output.
X([0]) Sets the setup level of the RGB output.
X([0]) Sets the Y signal level of the encoder output.
X([0]) Sets the sync signal level of the encoder output.
X([0]) Sets the setup level of the encoder output.
Note : The following items are displayed in DVW-790WS/790WSP/
709WS/709WSP only. The following items are valid when
the 16:9/4:3 MODE on the WIDE SCREEN page is set to 4:3.
X([0]) Sets the video signal level of the RGB output.
X([0]) Sets the setup level of the RGB output.
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1