Sony Digital Betacam DVW-707 Maintenance Manual page 127

Installation
2. T reel Table Cleaning
Clean the contact surface with the brake of the T
reel table using a cleaning cloth moistened with
cleaning fluid.
3. T Soft Brake Assembly Installation
(1) Hook the tension spring to the new T soft
brake assembly.
(2) Put the boss of the T soft brake assembly in the
hole of the main brake.
(3) Put the brake block in the shaft of the chassis
and move the main brake in the direction of the
arrow. In this way the pin of the main brake
will put in the groove of the brake release arm.
(4) Install the stop washer.
Adjustment After Replacement
4. Brake Torque Check
(Refer to section 4-3-3.)
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
T soft brake assembly installation
T soft brake assembly
Tension spring
Main brake
Brake block installation
Main brake
Brake release arm
4-2. Parts Replacement
Stop washer
Brake block
T reel table
Cleaning
Brake release arm
Groove
4-43