Sony Digital Betacam DVW-707 Maintenance Manual page 183

18. Driving Gear Installation
(1) Align the hole of the drive gear and the hole
(A) on the mechanical chassis and put the
drive gear to the shaft.
(2) Attach the drive gear using the new stop wash-
er 1.2.
19. Drawing Arm Installation
Put the drawing arm to the installing shaft and at-
tach it using the stop washer.
20. Pinch Arm Assembly Installation
Attach the pinch arm assembly.
(Refer to section 4-2-17.)
DVW-790WS/709WS/707 P2V1
DVW-790WSP/709WSP/707P P2V1
Longitudinal hole
Hole A
NG OK
4-2. Parts Replacement
Stop washer 1.2
Drive gear
NG
4-99