Contents Of Setup Menu - Sony Digital Betacam DVW-707 Maintenance Manual

2-1-2. Contents of Setup Menu

This section describes all menu items that appear when the service mode is selected.
(The items shown in halftone
(Values in square [|] of the Setup column indicate the default value when shipped from factory.)
No. Page Item
1 MARKER 1/3 SAFETY ZONE
SAFETY AREA
CENTER
CENTER H
CENTER V
2 MARKER 2/3 BOX CURSOR
BOX WIDTH
BOX HEIGHT
BOX H
BOX V
3 MARKER 3/3 TEST OUT MIX
RET MIX
TEST OUT VF DISP ON/[OFF]
TEST OUT MENU
RM VF MENU INH. [ON]/OFF
4 VF DISP 1/2 DISP MODE
EXTENDER
ZOOM
5 VF DISP 2/2 FILTER
WHITE
GAIN
SHUTTER
TAPE
AUDIO
IRIS
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
appear only in the service mode.)
Setup Description
[ON]/OFF
Sets the safety zone marker display to ON or OFF.
80%/ 90% /100% Sets the safety zone area to 80 %, 90 % or 100 %.
ON/[OFF] Sets the center marker display to ON to OFF.
X ([0]) Moves the center marker horizontally.
X ([0]) Moves the center marker vertically.
ON/[OFF] Sets the box cursor display to ON or OFF.
Note : The box cursor does not appear in the following cases.
X ([0]) Changes the width of the box cursor.
X ([0]) Changes the height of the box cursor.
X ([0]) Moves the box cursor horizontally.
X ([0]) Moves the box cursor vertically.
ON/[OFF] Turns ON/OFF the function of outputting the VF marker to TEST OUT.
ON/[OFF] Turns ON/OFF the function of mixing the VF marker with return video.
Turns ON/OFF the function of outputting the character to TEST OUT
where the character is displayed on VF when the VF DISPLAY
switch is set to ON.
ON/[OFF] Turns ON/OFF the function of outputting the menu to TEST OUT
where the menu is displayed on VF when the MENU ON/OFF/PAGE
switch is set to ON.
Note : When an RM is connected, the menu is forced to be outputted
ON : The menu is not displayed even through the MENU switch
OFF : The menu is displayed when the MENU switch is set to ON
1/2/[3] Set the display mode. (For details, refer to the Operation Manual.)
[ON]/OFF
Sets the extender display to ON or OFF.
[ON]/OFF
Sets the zoom position display to ON or OFF.
[ON]/OFF
Sets the filter display to ON or OFF.
[ON]/OFF
Sets the white balance display to ON or OFF.
[ON]/OFF
Sets the gain selection value display to ON or OFF.
[ON]/OFF
Sets the shutter speed/mode display to ON or OFF.
[ON]/OFF
Sets the tape remaining display to ON or OFF.
[ON]/OFF
Sets the CH-1 audio level display to ON or OFF.
[ON]/OFF
Sets the iris value display to ON or OFF.
The WIDE SCREEN page BOX/4:3/14:9 LIMIT is set to
any other item than BOX.
The WIDE SCREEN page BOX/4:3/14:9 MODE is set to
4:3, while the VF ASPECT is set to 16:9A or 16:9B.
regardless of this menu setting.
is set to ON when an RM is connected.
even though an RM is connected.
2-1. Service Mode
2-3