Sony Digital Betacam DVW-707 Maintenance Manual page 73

(5) Loosen the two screws (B 4x10) on the
shoulder pad (NS) assembly.
(6) Move the shoulder pad (NS) assembly in the
direction of the arrow.
(7) Remove the four screws (B 3x4). Discon-
nect the connection to the MB-810 board to
remove the connector box assembly.
(8) Disconnect the harnesses from the three
connectors (CN104, CN105 and CN109) on
the CNB-11 board.
2. Removing the CNB-11 Board
Remove the three screws (M 2x4) and the
harnesses from the seven connectors
(CN35, CN50, CN102, CN103, CN106, CN107
and CN108) to remove the CNB-11 board.
3. Removing the CNB Stay
Remove the precision screw (P 2.6x5) to remove
the CNB stay.
n
Be careful not to damage the harnesses around the
CNB stay.
4. Removing the RM-180 Board
Remove the two screws (K 2.6x5) to remove the
RM-180 board.
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
MB-810
board
B 3x8
Connector box assembly
M 2x4
CN107
CN106
CN35
CN108
CN50
Precision
P 2.6x5
K 2.6x5
3-3. Replacing the External Connectors/Switches
Shoulder pad (NS) assembly
B 4x10
CNB-11 board
CN104
CN109
CN105
CNB-11 board
CN103
CN102
CNB stay
RM-180 board
Connector box assembly
B 3x8
3-17