Skin Tone Adjustment - Sony Digital Betacam DVW-707 Maintenance Manual

7-18. Skin Tone Adjustment

Note
Perform this adjustment, if necessary, to suit the custom-
er's preferences.
Preparation
. On the setup menu, set as follows.
PAGE : S20*LEVEL 3
ITEM : SKIN TONE DETAIL
ITEM : SKIN TONE IND.
. Shoot a person's face.
Adjustment Procedure
Equipment : Any of color monitor, viewfinder or wave-
form/vector monitor.
Test point : TEST OUT or VIDEO OUT connector
1. Shoot a person's face in the central of the viewfinder.
2. On the setup menu, set as follows.
PAGE : S20*LEVEL 3
ITEM : SKIN TONE DET.
3. Push the rotary encoder.
(The detection area is displayed in a zebra pattern.)
4. Perform the adjustment in this step, if neccessary.
On the setup menu, adjust as follows.
PAGE : S20*LEVEL 3
ITEM : SATURATION
(Component in the saturation direction)
HUE (Hue)
WIDTH
(Component in the hue direction)
HUE
WIDTH
SATURATION
The skin detail detection area is displayed in a zebra
pattern.
Adjust so that zebra pattern displays only proper area.
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
ON
ON
?EXEC
R-Y
B-Y
5. On the setup menu, adjust as follows.
PAGE : S20*LEVEL 3
ITEM : SUPPRESS LEVEL (Factory setting: 0)
Spec. : Set the level to the desired detail level.
Setting After Adjustment
. On the setup menu, set as follows.
PAGE : S20*LEVEL 3
ITEM : SKIN TONE DETAIL
ITEM : SKIN TONE IND.
ITEM : SKIN TONE DET.
7-18. Skin Tone Adjustment
OFF
OFF
OFF
7-31