Shake (Pitch/Yaw Direction) Detection Sensor Block; Ms-1037 Board - Sony HXR-NX80 Service Manual
Solid-state memory camcorder
Hide thumbs
Also See for HXR-NX80:
- Simple live streaming quick manual (5 pages) ,
- Operating manual (171 pages)
Table of Contents
Advertisement
5-10.
Shake (PITCH/YAW Direction) Detection Sensor Block
5-10-1.
MS-1037 Board
The MS-1037 board also contains a gyro-sensor (SE7701) for detecting shake in the PITCH direction and YAW direction.
The signal from this sensor is output in the following route.
The 51-pin connector (CN4304) → 51-pin connector (CN4504) on the ZM-1005 board → 61-pin connector (CN4501)
→ VC-1045 board
This signal is input to the vibration-proof control and lens drive IC (IC1802) on the VC-1045 board.
5-11
HXR-NX80/HXR-MC88
- Quick Links:
- Location of Boards
Hide quick links:
Advertisement
Table of Contents
