Directory Service Settings - Oki CX4545 MFP Manual

8.[Administration] Tab Page
 Directory Service settings
You can register the directory service properties of the LDAP (Lightweight Directory Access Protocol) server. When a new
directory service is added, the users can search destinations using the LDAP server.
The [Directory Service] submenu can be accessed from the [Maintenance] menu on the [Administration] tab.
See the following pages for how to access it and information on the [Maintenance] menu:
 P.22 "Access policy mode"
 P.285 "[Maintenance] Item list"
1
2
Item name
1 [New] button
2 Directory Service List
 [Directory Service Properties] screen
You can display this screen by clicking a directory service name in the directly service list or the [New] button.
1
2
3
4
5
6
7
8
9
10
Item name
1 Directory Service Name
2 Server IP Address
3 Port Number
Registers the LDAP server that provides a directory service.
 P.293 "[Directory Service Properties] screen"
Displays a list of registered LDAP servers.
You can edit the registered details by clicking a directory service name.
 P.293 "[Directory Service Properties] screen"
Enter the directory service name to identify the directory service. You can enter up to 64
alphanumerical characters and symbols.
Enter the IP address or FQDN of the LDAP server. You can enter up to 128 alphanumerical
characters and symbols.
Enter the port number to access the LDAP server. You can enter a value in the range from 1
to 65535. Generally the default value "389" is used to access the LDAP server without SSL.
When the SSL is required, generally the "636" port is used to access the LDAP server.
8 [Administration] Tab Page
Description
Description
[Maintenance] Item list 293