Oki CX4545 MFP Manual page 193

8.[Administration] Tab Page
Item name
8 Password
9 Retype Password
10 Allow user to select network folder
to be used as a destination
If you want to allow users to specify either Remote 1 or Remote 2, select the one that is not set for the network folder as a
destination and select [Allow user to select network folder to be used as a destination] of the selected folder.
[Remote Setting List] screen
In this screen, you can set a list of network folders for Save as file destination, which can be selected from Remote 1 and
Remote 2.
1
2
3
4
5
6
7
8
Item name
1 [OK] button
2 [Cancel] button
3 [New] button
4 [Edit] button
5 [Delete] button
6 Name
7 Protocol
8 Network Path
Enter the password to access an SMB server, an FTP server, or a NetWare file server, if
required. You can enter up to 32 alphanumerical characters, symbols, and spaces. A single
space only can also be entered.
Enter the same password again for a confirmation.
Select this to allow users to specify a network folder as a destination. When the list of Save
as file destinations has been set in [Remote Setting List], you can select a network folder
from the list. Otherwise, select [Allow the following network folder to be used as a
destination].
Registers the remote setting list.
Cancels the registration of the remote setting list.
Sets a new remote setting.
 P.192 "[Remote Setting] screen"
Edits the item selected in the remote setting list.
 P.192 "[Remote Setting] screen"
Deletes the item selected in the remote setting list.
Displays the name of the remote setting.
Displays the protocol of the remote setting.
Displays the network path of the remote setting.
8 [Administration] Tab Page
Description
Description
[Setup] Item list 191