Oki CX4545 MFP Manual page 204

8 [Administration] Tab Page
Item name
11 PCL Font Number
12 PCL Line Termination
13 Symbol set
14 Paper Source
15 Do not Print Blank Pages
When printing is performed using the UNIX filters or CUPS, this setting is not reflected. If you do not want to print blank pages
in these printings, enable [Do not Print Blank Pages] in the UNIX filter command or CUPS setting. For the setting instructions,
refer to the Software Installation Guide or Printing Guide.
16 Letterhead Print Mode
The Letterhead Print Mode is available only for supported models.
202 [Setup] Item list
Enter the font number of the internal PCL font to be used as the default font for printing. You
can check the font numbers and internal PCL fonts in the Internal PCL Font List. Refer to the
Printing Guide for the font number and internal PCL fonts.
Select the type of the line termination.
Select the symbol set that applies to a raw job.
Select the paper source that applies to a raw job.
Select whether blank pages are printed or not.
Select whether the last page (odd page number) is printed on the same side as the other
odd-number pages when printing both sides of a Raw print job whose total page number is
odd. Select [ON] to print the last page on the same side (back) as the other odd-number
pages. Select [OFF] to print it on the same side (front) as even-number pages.
Description