Setting Up Copy Job Enforcement Continue - Oki CX4545 MFP Manual

8 [Administration] Tab Page
 Setting up Copy Job Enforcement Continue
1
2
3
4
5
Item name
1 Automatic Change Of Paper
Source
2 Paper Of Different Direction
3 Auto Exit Tray Change (Cascade
Print)
4 Suspend Printing if Stapler Empty
5 Continue Printing when Punch
Dust is full
182 [Setup] Item list
Specify whether or not to change the paper source automatically when the size of the
original and the paper in the paper source do not match.
 ON — Select this to change the paper source and continue processing the job.
 OFF — Select this to stop the job.
Specify whether or not to copy on paper which is loaded in the paper source in a different
orientation from the original.
 ON — Select this to continue processing the job by copying on paper in a different
orientation.
 OFF — Select this to stop the job.
Specify whether or not to switch the receiving tray automatically.
 ON — Select this to continue processing the job by switching the receiving tray.
 OFF — Select this to stop the job.
Specify whether to stop printing when staples run out.
 ON — Select this to stop printing when staples run out.
 OFF — Select this not to stop printing when staples run out.
Specify whether to continue printing when the punch dust bin is full.
 ON — Select this to continue printing even when the punch dust bin is full.
 OFF — Select this to stop printing when the punch dust bin is full.
Description