Removing The Client Software - Oki CX4545 MFP Manual

8 [Administration] Tab Page
 Removing the client software
You can remove client software from TopAccess so that it can no longer be installed from TopAccess.
Removing the software from TopAccess
1
Start TopAccess access policy mode.
 P.22 "Access policy mode"
2
Click the [Administration] tab.
3
Click the [Maintenance] menu and [Remove Software] submenu.
The Remove Software submenu page is displayed.
4
Select the check box of the software which you are going to remove and click [Delete].
The selected software is deleted from this equipment.
304 [Maintenance] How to Set and How to Operate