Oki CX4545 MFP Manual page 296

8 [Administration] Tab Page
Item name
4 Authentication
5 Search Base
6 User Name
7 Password
8 Search Timeout
9 Enable SSL
 When [Verify with imported CA certification(s)] is selected, you must import the CA certificate in this equipment.
 P.269 "[Security] How to Set and How to Operate"
 If at least one of the registered LDAP directory services requires the SSL, you must enable the [Enable SSL] option. When
the [Enable SSL] option is enabled, this equipment will connect the registered LDAP directory services using SSL first.
Then if the connection fails using SSL, this will connect to the registered LDAP directory service without using SSL.
Therefore, even if you enable the [Enable SSL] option, this equipment can also connect to an LDAP directory service that
does not require the SSL.
 Not all operating systems support SSL for all protocols.
10 SSL Port Number
294 [Maintenance] Item list
Select the SASL authentication protocol. If you do not know the authentication type, select
[Auto].
 Auto — Select this to access the LDAP server using the appropriate authentication that
this equipment detects.
 Kerberos — Select this to access the LDAP server using the Kerberos authentication.
 Digest-MD5 — Select this to access the LDAP server using the Digest-MD5
authentication.
 CRAM-MD5 — Select this to access the LDAP server using the CRAM-MD5
authentication.
 Login — Select this to access the LDAP server using the login authentication.
 Plain — Select this to access the LDAP server using the plain authentication.
 Simple Bind — Select this to access the LDAP server using the Simple Bind
authentication.
Enter the search base. When you configure the Active Directory in Windows server, make
sure to enter this option. You can enter up to 256 alphanumerical characters and symbols.
Enter the log-in user name if a user name is required to access the directory service. You
can enter up to 256 alphanumerical characters and symbols.
Enter the password if required to access the directory service. You can enter up to 32
alphanumerical characters and symbols.
Select the timeout period for quitting communication when no response is received from the
LDAP server. Specify within the range from 1 to 5. "1" is set as the default.
Select whether the SSL (Secure Sockets Layer) is enabled or disabled for communicating
the LDAP directory service.
 Disable — Select this to disable the SSL for communicating the LDAP directory service.
 Verify with imported CA certification(s) — Select this to enable the SSL using the
imported CA certificate.
 Accept all certificates without CA — Select this to enable the SSL without using
imported CA certificate.
Enter the port number to access the LDAP server using SSL. You can enter a value in the
range from 1 to 65535. Generally the default value "636" is used.
Description