8.[Administration] Tab Page
6
In each box displayed, click [Browse] to locate the setup files to be uploaded.
At the left of each box, the file name will be displayed. Be sure to specify the same file for each box.
7
Click [Upload].
Specified files are uploaded in this equipment.
Preparing a driver file for uploading
1
Insert the "Client Utilities" CD-ROM into the PC's CD-ROM drive.
2
Open the folder where driver files and plug-in files are stored.
They are stored in the "Client\Drivers" folder.
3
Compress the folder in zip format to create the driver file for uploading.
Folder name
PCL6
PS
XPS
See the following for how to upload a driver file.
P.302 "Uploading new versions of client software in TopAccess"
Match the name of the ZIP file to be created with the file name displayed on the TopAccess screen. The file
name is case sensitive. If the file name is different, you will not be able to upload it.
Name of the ZIP file to be created
pcl6.zip
ps.zip
xps.zip
Remarks
PCL printer driver
PS printer driver (PostScript)
XPS printer driver
[Maintenance] How to Set and How to Operate
8 [Administration] Tab Page
303