Oki CX4545 MFP Manual page 156

8 [Administration] Tab Page
Item name
6 Backup Domain Controller
If the wrong primary or backup domain controller is specified, the NETWORK INITIALIZING message will be displayed for up
to 4 minutes while the equipment searches for the primary or backup domain controller. In that case, correct the primary or
backup domain controller setting after the NETWORK INITIALIZING message disappears.
7 Logon User Name
8 Password
9 Primary WINS Server
When the [Obtain a WINS Server Address automatically] option is enabled in the TCP/IP settings, the primary and secondary
WINS server address can be obtained using the DHCP server.
 P.143 "Setting up TCP/IP"
10 Secondary WINS Server
When the [Obtain a WINS Server Address automatically] option is enabled in the TCP/IP settings, the primary and secondary
WINS server address can be obtained using the DHCP server.
 P.143 "Setting up TCP/IP"
If "0.0.0.0" is entered for the Primary WINS Server and Secondary WINS Server, this equipment will not use the WINS server.
11 SMB Signing of SMB Server
If you do not know whether the SMB Signing of SMB Client is enabled or disabled in the client computers, it is recommended
to select [If client agrees,digital signature is done for the communication.]. If this is set incorrectly, the SMB communication
may become unavailable.
154 [Setup] Item list
Specify the server name or IP address of the backup domain controller when this equipment
will log on the domain network, if required. If the Primary Domain Controller is unavailable,
the Backup Domain Controller will be used to log on.
Enter a valid user name to log on to the specified domain.
Enter the password for the specified log on user name to log on the domain network.
Specify the IP address of the primary WINS server when the WINS server is used to provide
the NetBIOS name in your local area network. This option would be more useful to access
this equipment using the NetBIOS Name from a different subnet.
Specify the IP address of the secondary WINS server as you require when the WINS server
is used to provide NetBIOS name in your local area network. If the Primary WINS Server is
unavailable, the Secondary WINS Server will be used.
Select whether SMB Signing is enabled or disabled when a client accesses this equipment
using SMB, such as when a client accesses the shared folder in this equipment.
 If client agrees,digital signature is done for the communication. — Select this to
use the digital signature to secure communication only when a client accesses this
equipment with a digital signature. Even if a client accesses this equipment without a
digital signature, the communication is allowed without the digital signature.
 Digital signature is always done for the communication on the server side. —
Select this to allow the communication only when a client accesses this equipment with
a digital signature. When a client accesses this equipment without a digital signature,
the communication is not allowed.
 Digital signature isn't done for the communication for the server. — Select this to
allow the communication only when a client accesses this equipment without a digital
signature. When a client is set to always access an SMB server with a digital signature,
the communication is not allowed.
Description