Oki CX4545 MFP Manual page 161

8.[Administration] Tab Page
 Setting up SMTP Server
In SMTP Server, you can enable or disable SMTP transmission for receiving the Internet Fax and E-mails. This function is
usually set when you want to enable the Offramp Gateway feature.
1
2
3
4
5
6
Item name
1 Enable SMTP Server
2 Port Number
When the same port number as the secondary one in the HTTP setting (SSL port number when SSL in the HTTP setting is
enabled) is selected, you cannot access TopAccess or the e-Filing web utility. If you make a mistake, use the control panel of
the equipment to change the HTTP setting and enter the correct port number.
3 Email Address
4 Enable OffRamp Gateway
5 OffRamp Security
6 OffRamp Print
Select whether this equipment works as an SMTP server or not. This must be enabled when
you use the Offramp Gateway feature. When this is enabled, this equipment can receive
Internet Faxes or E-mails that are forwarded through the SMTP to the domain of this
equipment. [Enable] is set as the default.
Enter the port number to transmit an Internet Faxes or E-mails. Generally "25" is used.
Enter the E-mail address of this equipment. When this equipment works as an SMTP server,
it can receive all Internet Faxes and E-mails that contain its domain name. If the E-mail
address of the received document matches the address you set here, this equipment prints
it. You can enter up to 70 alphanumerical characters and symbols other than =, ;
(semicolon), #, and \ (backslash).
Select whether the OffRamp Gateway transmission is enabled or disabled. [Disable] is set
as the default.
Select whether the Offramp Security is enabled or disabled. When this is enabled, this
equipment cancels the offramp gateway transmissions that are forwarding to the fax
numbers not registered in the Address Book of this equipment. This can prevent the
unauthorized offramp gateway transmission. [Enable] is set as the default.
Select whether this equipment should print documents sent using the offramp gateway
transmission. When this is enabled, this equipment automatically prints documents sent
using offramp gateway transmission, so that they can be confirmed. [Enable] is set as the
default.
8 [Administration] Tab Page
Description
[Setup] Item list 159