Oki CX4545 MFP Manual page 169

8.[Administration] Tab Page
 Setting up Web Services Setting
In Web Services Print and Web Services Scan, you can set the Web Services Setting. The Web Services Print operations
and Web Services Scan operations are performed on client computers with Windows Vista/Windows 7/Windows Server
2008 through a network.
1
2
3
4
5
6
7
8
9
Item name
1 Enable SSL
2 Friendly Name
3 Web Services Print
To enable Web Services Print using SSL, a certificate must be installed in this equipment or a client computer. For the details,
see the following pages:
 P.269 "[Security] How to Set and How to Operate"
4 Printer Name
5 Printer Information
6 Web Services Scan
7 Scanner Name
8 Scanner Information
9 Authentication for PC Initiated
Scan
Specify whether or not to use SSL in Web Service.
 Enable — Select this to use SSL.
 Disable — Select this no to use SSL.
Assign the friendly name for this equipment. You can enter up to 127 characters.
Select whether the Web Services Print is enabled or disabled.
 Enable — Select this to enable the Web Services Print.
 Disable — Select this to disable the Web Services Print.
Assign the printer name for this equipment. You can enter up to 127 characters other than =,
; (semicolon), #, and \ (backslash). "MFP model name-Mac address" is set as the default.
Assign the printer information for this equipment. You can enter up to 127 characters other
than =, ; (semicolon), #, and \ (backslash).
Select whether the Web Services Scan is enabled or disabled.
 Enable — Select this to enable the Web Services Scan.
 Disable — Select this to disable the Web Services Scan.
Assign the scanner name for this equipment. You can enter up to 127 characters other than
=, ; (semicolon), #, and \ (backslash). "MFP model name-Mac address" is set as the default.
Assign the scanner information for this equipment. You can enter up to 127 characters other
than =, ; (semicolon), #, and \ (backslash).
Specify whether to enable user authentication before accepting a scan from a client PC.
 Do not accept any job — Select this not to accept any jobs regardless of the result of
user authentication.
 Accept the job if user name is valid — Select this to accept jobs only after successful
user authentication.
 Accept any job — Select this to accept any jobs regardless of the result of user
authentication.
8 [Administration] Tab Page
Description
[Setup] Item list 167