Oki CX4545 MFP Manual page 103

5.[Registration] Tab Page
4
Click [Edit] or [Delete].
If you have clicked [Delete], the delete confirmation dialog box is displayed. Click [OK].
5
Select agents and click [Select Agent].
You can configure the following settings in this page:
 P.82 "[MailBox Properties] screen"
6
Click each button displayed in the page to set the template properties.
MailBox Setting
[Destination Setting]
[InternetFax Setting]
[Relay End Terminal Report]
[Email Setting]
[Save as file Setting]
[Box Setting]
7
After configuring the desired mailbox properties, click [Save].
The mailbox properties are registered.
Specify mailbox settings.
 P.83 "MailBox Setting (Mailbox)"
Specify the destination to be sent. This can be set only when creating an Internet/
Fax(Relay) agent or Email agent.
 P.84 "Destination Setting (Mailbox)"
Specify how the document is transmitted as an Internet Fax. This can be set only when
creating an Internet/Fax(Relay) agent.
 P.84 "InternetFax Setting (Mailbox)"
The Internet/Fax (Relay) agent cannot be used to forward an inbound fax routed via
Inbound FAX Routing.
Specify the destination for the relay end terminal report when forwarding has been
performed. This can be set only when creating an Internet/Fax(Relay) agent.
 P.84 "Relay End Terminal Report (Mailbox)"
Specify how the document is transmitted as an E-mail message. This can be set only
when creating an Email agent.
 P.85 "Email Setting (Mailbox)"
Specify how the document is saved on your computer hard disk or a network folder. This
can be set only when creating a Save as file agent.
 P.85 "Save as file Setting (Mailbox)"
Specify how the document is saved in a mailbox. This can be set only when creating a
Store to e-Filing agent.
 P.85 "Box Setting (Mailbox)"
[Registration] How to Set and How to Operate
5 [Registration] Tab Page
101