Oki CX4545 MFP Manual page 187

8.[Administration] Tab Page
Item name
19 Duplex Print
20 Rotate Sort
21 Recovery Transmit
22 Journal Auto Print
23 Memory Transmission Report
24 Multi Transmission Report
25 Polling Report
26 Relay Originator
27 Secure Receive
Select whether to print the received fax images on both sides of the recording paper.
Select whether to rotate the output direction in the tray for each reception.
Select whether to re-transmit a fax after failing the initially specified number of redial
attempts. When this is enabled, select the stored time length from 1 to 24 hours.
Select whether to automatically print a transmission and reception journal after every
transmission completed.
Select how to print a result report after a memory transmission.
 OFF — Select this to not print a memory transmission report.
 Always — Select this to print a memory transmission report with all page images for
each memory transmission completed.
 ON ERROR — Select this to print a memory transmission report with all page images
only when the memory transmission is not successfully completed.
 Always(Print 1st Page Image) — Select this to print a memory transmission report with
the 1st page image for each memory transmission completed.
 ON ERROR(Print 1st Page Image) — Select this to print a memory transmission report
with the 1st page image only when the memory transmission is not successful.
Select how to print a result report after a multi-address transmission.
 OFF — Select this to not print a multi-address transmission report.
 Always — Select this to print a multi-address transmission report with all page images
for each multi-address transmission completed.
 ON ERROR — Select this to print a multi-address transmission report with all page
images only when the multi-address transmission is not successfully completed.
 Always(Print 1st Page Image) — Select this to print a multi-address transmission
report with the 1st page image for each multi-address transmission completed.
 ON ERROR(Print 1st Page Image) — Select this to print a multi-address transmission
report with the 1st page image only when the multi-address transmission is not
successful.
Select how to print a result report after a multi-polling reception.
 OFF — Select this to not print a multi-polling report.
 Always — Select this to print a multi-polling report for each multi-polling reception.
 ON ERROR — Select this to print a multi-polling report only when the multi-polling
reception is not successful.
Select how to print a result report after a relay transmission.
 OFF — Select this to not print a relay station report.
 Always — Select this to print a relay station report with all page images for each relay
transmission completed.
 ON ERROR — Select this to print a relay station report with all page images only when
the relay transmission is not successful.
 Always(Print 1st Page Image) — Select this to print a relay station report with the 1st
page image for each relay transmission completed.
 ON ERROR(Print 1st Page Image) — Select this to print a relay station report with the
1st page image only when the relay transmission is not successful.
You can set the Secure Receive function to store received fax jobs in the equipment without
printing them.
With this function, you can prevent the leaking of confidential information in a fax received
when no people are present in your office, such as nighttime or holidays, or when an
unspecified number of people visit your office.
 Enable — Enables the Secure Receive function.
To print the fax jobs the Secure Receive function received, you must set [Line1 :
Password] and [Retype Password] or [Line2 : Password] and [Retype Password]. For
the password, you can enter up to 20 alphanumerical characters and symbols (# $ ( ) * +
, - . / : ; = ? @ \ ^ _ ` { | } ~).
 Disable — Disables the Secure Receive function.
 Weekly Schedule — Sets whether the Secure Receive function is enabled or disabled
for each day of the week. You can set the time to enable and disable the Secure
Receive function (24-hour display).
- For a day on which you want to enable the Secure Receive function all day, specify
"00:00" for "Disable" and "00:00" for Enable.
- For a day on which you want to disable the Secure Receive function all day, specify
"00:00" for "Disable" and "24:00" for Enable.
To print the fax jobs the Secure Receive function received, you must set [Line1 :
Password] and [Retype Password] or [Line2 : Password] and [Retype Password]. For
the password, you can enter up to 20 alphanumerical characters and symbols (# $ ( ) * +
, - . / : ; = ? @ \ ^ _ ` { | } ~).
8 [Administration] Tab Page
Description
[Setup] Item list 185