Oki CX4545 MFP Manual page 165

8.[Administration] Tab Page
 Setting up SLP Session
When SLP is enabled, this equipment becomes a Service Agent that responds to requests from a User Agent for
searching particular services and registers services to a Directory Agent.
The SLP setting only supports the print services shown below.
Raw TCP print, LPD print, IPP print, WSD print, SMB print, FTP print
About the "printer-location" attribute of SLP
SLP has an attribute called "printer-location" as one of the services provided. The information of "printer-location" is
the device setting information on the [General] submenu of the [Setup] menu on the [Administration] tab page, and that
of the [Location] field of [Device Information] on the [Device] tab page. Turn the equipment off and on if you have
changed [Location] from TopAccess. The change is reflected in "printer-location" of SLP after the equipment is
restarted.
1
2
3
Item name
1 Enable SLP
2 TTL
3 Scope
 More than one group can be entered for [Scope] by separating them with a comma.
 Characters ( ) \ ! < = > ~ ; * + cannot be entered in the scope.
 Do not leave this field blank or the SLP setting will be disabled.
 You can search a particular service using Konqueror (SUSE Linux) or SLPSNOOP utility (Novell client) which is a User
Agent (UA).
Select whether SLP service is enabled or disabled. [Enable] is set as the default.
Set TTL (Time To Live, a scope in the network that provides SLP service).
This is to enable the communication among User Agents and Directory Agents located on
different networks.
Set this for specifying the scope of groups that provide SLP services. The default value is
"DEFAULT".
Set this for specifying the scope of groups that provide SLP services.
8 [Administration] Tab Page
Description
[Setup] Item list 163