8.[Administration] Tab Page
7
Click [Save] on the Network submenu page.
The confirmation dialog box appears.
When you click [Cancel] before saving the setting changes, they will not be saved and will return to the current
settings. Note that they will not be returned to the factory default by clicking [Cancel]. This can only clear the
changes and restore the current settings before saving the changes.
8
Click [OK] to apply the changes.
This equipment starts initializing the network interface card to apply the changes.
During the initialization of the network interface card, the network will not be available. TopAccess will display
"Please restart after waiting a few minutes." The touch panel will display "NETWORK INITIALIZING". When this
message disappears, TopAccess will once again be available.
8 [Administration] Tab Page
[Setup] How to Set and How to Operate
219