Table of Contents
Advertisement
Windows
Sonar Compatibility Mode
Tick the Sonar Compatibility Mode checkbox to improve UAD-1 plug-in per-
formance when used with Cakewalk Sonar. This mode should be disabled
when using different hosts, otherwise audio degradation could occur.
Mac
Release all DSP resources on Audio Unit bypass
Some Audio Unit hosts dynamically bypass plug-ins when they are not being
used during playback, for example when no audio is present at the current
playback position. During this dynamic bypassing, UAD plug-ins stay loaded
on the device, which reduces glitches in playback.
This setting affects the Audio Units platform only. Checking the "Release all
DSP resources on AudioUnit bypass" option will unload UAD plug-ins from
the device during dynamic bypassing. When the option is checked, UAD DSP
usage may be reduced during dynamic bypassing, but the possibility of
glitching during playback is increased.
Note:
taining UAD plug-ins are reloaded.
Mac
Force Logic to use "live mode" for tracks with UAD plug-ins
When UAD plug-ins and Logic 7.2.1 (and higher) are used together and this
setting is checked, all Logic tracks with UAD plug-ins are forced into Logic's
"live mode" and latency is reduced. Reduced latency is useful for tracking
when Logic's Software Monitoring feature is active.
Note:
When this setting is active, UAD-1 latency is twice the hardware I/O buffer
and UAD-2 latency is the same as the hardware I/O buffer. In Logic versions
prior to 7.2.1 (and later versions when live mode is disabled), UAD latency
is determined by the larger of the audio interface hardware I/O buffer size
and the Process Buffer Range setting within Logic.
When Logic's "live mode" is NOT active and this setting is NOT enabled, the
minimum Process Buffer Range setting ("Small") in Logic 7 corresponds to
512 samples, meaning the minimum possible UAD latency is 1024 samples
for UAD-1 or 512 samples for UAD-2 (the current latency is displayed in the
UAD Meter System Information panel). Latency can be further reduced by us-
ing
UAD Powered Plug-Ins Manual
Changes to this setting do not take effect until all open sessions con-
Logic's "live mode" is unrelated to UAD-2's LiveTrack Mode.
LiveTrack Mode
(UAD-2 only).
- 76 -
Chapter 6: UAD Meter & Control Panel
Advertisement
Table of Contents
