Table of Contents
Advertisement
EMT 250 Screenshot
Figure 83. The EMT 250 plug-in window
Functional Overview
Program Modes
The EMT 250 offers six effect types: Reverb, Delay, Phase, Chorus, Echo, and
Space. These effects are called "program modes" in the EMT 250. Only one
mode can be active at a time.
Each program mode has up to five parameters that can be modified by the
four main control "levers" plus the front/rear switch. The function of these con-
trols varies per program mode (see below). Additionally, there are several
global controls that have the same function in all modes.
Variable Control
The function of control levers 1, 2, 3, and the Front/Rear switch depends
Functions
upon which program mode is active. This is a primary consideration to re-
member when operating the EMT 250.
varying functions of the control levers and the front/rear switch in each mode.
Important:
depending on the program mode.
UAD Powered Plug-Ins Manual
The function of the "levers" and the front/rear switch changes
- 242 -
Table 17 on page 245
Chapter 20: EMT 250 Electronic Reverberator
details the
Advertisement
Table of Contents
