Table of Contents
Advertisement
Frequency Knob
The Frequency knob determines the center frequency of the filter band to be
boosted or attenuated by the band Gain setting.
This knob is stepped with 41 values for easy reproducibility during mastering.
To double the resolution of the available knob values (for fine control), press
the shift key on the computer keyboard while adjusting the knob. This in-
creased 2x frequency resolution (within the available range) can also be
specified using text entry, parameter automation, or 'controls' mode. The
available values for each of the four bands is the same in both parametric and
shelf modes, and are listed in
Note:
Table 35. Precision Equalizer Band Frequency Ranges
The Gain knob determines the amount by which the frequency setting for the
Gain Knob
band is boosted or attenuated. The available Gain values are listed in
Table 36
Table 36. Precision Equalizer band gain values
High-Pass Filter
Table 37. Precision Equalizer high-pass filter frequencies
UAD Powered Plug-Ins Manual
Not all host applications support automation and/or controls mode.
Low Frequencies (L1 and L2)
High Frequencies (H1 and H2)
below.
0.0 dB
±2.0 dB
±0.5 dB
±2.5 dB
±1.0 dB
±3.0 dB
±1.5 dB
±4.0 dB
The high-pass filter is useful for reducing low frequency
content. It is a global filter; it always affects both left and
right channels, regardless of the active mode. See
Table 37
Off (disabled)
40 Hz
10 Hz
60 Hz
20 Hz
80 Hz
30 Hz
100 Hz
Table 35
below.
19 – 572 Hertz
617 – 27k Hertz
±5.0 dB
±6.0 dB
±8.0 dB
below for available settings.
- 444 -
Chapter 43: Precision Equalizer
Advertisement
Table of Contents
