Table of Contents
Advertisement
Figure 10. The UAD System Information panel
Plug-In Latency
UAD plug-in latency for each device type (UAD-2 and UAD-1) is displayed
Section
here. The calculation is based on the audio I/O interface buffer size and the
sample rate. The window uses this information to calculate and display the re-
sulting latency in samples and milliseconds.
The buffering methods used by UAD-2 and UAD-1 drivers are different for the
two device types, which is why the latency differs between the devices.
Note:
when LiveTrack mode
UAD Powered Plug-Ins Manual
Displayed latency does not reflect the actual lowered latency value
(page
89) is active.
- 66 -
Chapter 6: UAD Meter & Control Panel
Advertisement
Table of Contents
