Table of Contents
Advertisement
Mute
This switch mutes the signal at the input to DreamVerb. This allows the reverb
tail to play out after mute is applied, which is helpful for auditioning the sound
of the reverb. Mute is on when the button is gray and off when the button is
black.
The wet and dry mix of DreamVerb is controlled with this slider. The two but-
Mix
tons above this slider labeled "D" and "W" represent Dry and Wet; clicking
either will create a 100% dry or 100% wet mix.
Dry
When this button (labeled "D") is enabled, DreamVerb is 100% dry. It has the
same effect as moving the Mix slider to 0%. Dry is on when the button is gray
and off when the button is black.
When this button (labeled "W") is enabled, DreamVerb is 100% wet. It has
Wet
the same effect as moving the Mix slider to 100%. Wet is on when the button
is gray and off when the button is black.
DreamVerb Preset Management
Factory Presets
In the preset menu there is a bank of 32 factory presets. Presets modified in
the bank are saved when another preset within the bank is selected.
Edits to any and all presets in the list are maintained separately within each
instance of a plug-in within a session.
To return to the default factory bank settings, reload the factory bank.
Save/Load
Note:
the Toolbar for consistency. See
The Save/Load feature in DreamVerb supports presets but not banks. To save
and load banks, use the host's bank management feature (if available).
Default Preset
When the Save and Load buttons are used within DreamVerb, the file open
Location
and save dialogs default to the same location each time.
UAD Powered Plug-Ins Manual
Save/Load pre-dates the UAD plug-in Toolbar. We recommend using
Not all plug-in hosts include a method for load-
ing and saving plug-in settings. DreamVerb in-
cludes Save and Load buttons within the graphi-
cal interface itself to accommodate hosts that do
not have this feature.
"UAD Toolbar" on page 87
- 217 -
for details.
Chapter 17: DreamVerb
Advertisement
Table of Contents
