Table of Contents
Advertisement
However, if a computer system has both PCI/PCI-X and PCIe slots, the
UAD–1, UAD–1e, and UAD-2 can all be installed and used simultaneously as
a multidevice system. See
Important:
1e, UAD-2, and UAD-Xtenda will ONLY work in PCI Express (PCIe) slots. Be
extremely careful to only install the UAD device(s) into a compatible slot!
PCI Express (PCIe):
Figure 1. PCI and PCIe connectors are incompatible
UAD-2, UAD-1e, and UAD-Xtenda are "x1" PCIe cards. Although these cards
PCIe x1
can be installed in any x1/x4/x8/x16 PCIe slot, putting a them in any PCIe
slot faster than x1 will not improve performance.
Installing the
After installing the UAD Powered Plug-Ins software, install the UAD DSP
UAD Cards
card(s). Hardware installation is the same for all platforms.
To install the UAD DSP and/or UAD-Xtenda card(s):
1.
2.
3.
4.
UAD Powered Plug-Ins Manual
The UAD-1 will ONLY work in PCI and PCI-X slots, and the UAD-
PCI/PCI-X:
UAD-1 only
UAD-1e
UAD-2
UAD-Xtenda
Install the UAD software first
Power down the computer system.
Open the computer case. If necessary, refer to the computer manufacturer's
documentation for instructions.
Remove the rear slot cover and screw of an available expansion slot.
Chapter 5, "Using Multiple UAD Devices."
(page
28).
- 31 -
Chapter 2: UAD Installation
Advertisement
Table of Contents
