Little Labs Ibp Latency; Webzine Article - Universal Audio UAD User Manual

Powered plug-ins software version 6.1
Table of Contents

Advertisement

Phase Adjust
This switch determines the range of the Phase Adjust parameter. This is useful
90°/180°
when finer Phase Adjust resolution is desired.
When the switch is disengaged, the Phase Adjust range is 180°. When the
switch is engaged (darker), the Phase Adjust range is 90°.
This switch sets the range of frequency emphasis. When the switch is disen-
Phase Center
Lo/Hi
gaged (lighter), the Phase Center range is Hi. When the switch is engaged
(darker), the Phase Center range is Lo.
Note:
dividual tone signals such as a kick drum or toms as opposed to program ma-
terial.
This switch disables the plug-in. When the switch is disengaged, the plug-in is
Power
bypassed. When the switch is engaged (darker), the plug-in is active and the
green LED is illuminated.

Little Labs IBP Latency

The Little Labs IBP uses an internal upsampling technique. This upsampling re-
sults in a slightly larger latency than other UAD plug-ins. See
Upsampled Plug-Ins" on page 108
Note:
supports full plug-in delay compensation throughout the signal path, or when
it is used only on the outputs. See

WebZine article

An interesting (and highly technical) article named "Allpass Filters" about
phase shifting with allpass filters can be found in the November 2008 "Ask
the Doctors" section of our online WebZine:
• http://www.uaudio.com/webzine/2008/november/doctors.html
UAD Powered Plug-Ins Manual
Use of the 90°/180° and Lo/Hi parameters are typically used for in-
Compensating for Little Labs IBP is not required if the host application
for more information.
"Host PDC Implementation" on page
- 314 -
"Compensating
101.
Chapter 28: Little Labs IBP

Advertisement

Table of Contents
loading

Related Products for Universal Audio UAD

This manual is also suitable for:

Uad powered plug-ins

Table of Contents