Table of Contents
Advertisement
Program Mode Controls
The details of each unique program mode are below, followed by descrip-
tions of the global controls, which affect all program modes.
Control
Table 17
Functions
the EMT 250 program modes. See
page 242
Table 17. The variable control functions of the EMT 250
Program Mode
Reverb
Delay
Phase
Chorus
Echo
Space
*Note: The parameter values of lever positions marked with an asterisk are not saved in sessions or presets.
The Program Mode buttons define which of the available program modes is
Program Mode
active. The six program modes are: Reverb (REV), Delay (DEL), Phase (PHAS),
Chorus (CHOR), Echo, and Space (SPC).
Click a Mode button to activate that program mode; the button is illuminated
for the currently active mode (only one mode can be active at a time). Each
program mode and its associated parameters are described in detail below.
Tip:
each program mode.
UAD Powered Plug-Ins Manual
displays the parameter that each control is mapped to for each of
for details.
Lever 1
Lever 2
Reverb Decay
LF Decay
Coarse Delay Time
Fine Delay Time
Phase (curve)
(none)*
(none)*
(none)*
Coarse Delay Time
Fine Delay Time
(none)*
(none)*
See
Table 17 on page 245
"Variable Control Functions" on
Lever 3
HF Decay (damping)
Selects L/R channel
for time adjustment*
(none)*
Variation
HF Decay (damping)
(none)*
for a matrix of controls that are available in
- 245 -
Chapter 20: EMT 250 Electronic Reverberator
Lever 4
Front/Rear
Predelay
Output Pair
Predelay
Stereo/Mono
Predelay
Output Pair
Predelay
Stereo/Mono
Predelay
Input Mute
Predelay
Output Pair
Advertisement
Table of Contents
