Table of Contents
Advertisement
Trem/Fade Module
Figure 136. The Trem/Fade module
Trem/Fade is a sophisticated envelope-controlled modulation processor that
can produce classic tremolo, fade, and other gain modulation effects. Trem-
olo is achieved by modulating the amplitude (volume) of a signal with a low
frequency oscillator (LFO). Trem/Fade includes some new modes such as
Shimmer and VariTrem that enable the production of new volume effects.
Sync Button
This button puts the plug-in into Tempo Sync mode. See
Sync"
Threshold
Sets the threshold level for the Trem/Fade effect. When the signal level ex-
(Thresh) Knob
ceeds the threshold, the Trem/Fade effect is triggered. The range is 0 dB to
-80 dB.
Note:
old detector is connected to the output of the Gate module. This allows for op-
timal level tracking independent of the amplifier and other effect settings.
Once a Trem/Fade effect is instigated by crossing the threshold level, the ef-
fect will continue until the signal drops below the Threshold level. For exam-
ple, if a signal is faded in, the signal won't fade in again until its level drops
below the Threshold value.
The Trigger LED indicates when the Trem/Fade input signal is above the
Trigger LED
Threshold. It provides visual feedback for optimizing the Threshold setting.
The Trigger LED glows bright red when the signal is above the Threshold
value.
UAD Powered Plug-Ins Manual
for more information.
When Trem/Fade is used within the complete Nigel plug-in, the thresh-
- 412 -
Chapter 8, "Tempo
Chapter 38: Nigel
Advertisement
Table of Contents
