Levels - Universal Audio UAD User Manual

Powered plug-ins software version 6.1
Table of Contents

Advertisement

Set the positioning for the early reflection or late-field reverberation with any of the
following methods:
1.
2.
RealVerb Pro allows you to control the distance of the perceived source with
Distance
the Distance control in the Positioning panel (see
environments, sounds originating close to the listener have a different mix of
direct and reflected energy than those originating further from the listener.
To adjust the distance of the source:
1.
The wet and dry mix of the reverb is controlled from the Mix slider in the Po-
Wet/Dry Mix
sitioning panel (see
and "W" represent Dry and Wet; clicking either will create a 100% dry or
100% wet mix.

Levels

The Levels panel adjusts the Input Gain and Output Gain for RealVerb Pro.
These levels are adjusted by dragging the sliders to the desired values. You
can mute the input signal by clicking the Mute button.
Figure 164. RealVerb Pro Levels panel
UAD Powered Plug-Ins Manual
Drag the left and right slider handles to adjust the stereo width. The length
of the blue slider is adjusted. For a full stereo signal, drag the left handle all
the way to left, and right handle all the way to the right.
Drag the blue center of the slider left or right to set the positioning of the sig-
nal. If you drag all the way to the left or right, the stereo width is adjusted.
For a mono signal panned hard left or right, drag the slider all the way to
the left or right.
Drag the Distance slider to the desired percentage value. Larger percent-
ages yield a source that is further away from the listener. A value of 0%
places the source as close as possible to the listener.
Figure
163). The two buttons above this slider labeled "D"
- 495 -
Figure
163). In reverberant
Chapter 48: RealVerb Pro

Advertisement

Table of Contents
loading

Related Products for Universal Audio UAD

This manual is also suitable for:

Uad powered plug-ins

Table of Contents