Vibrato Controls
Rate Knob
The rate knob controls the rate of the vibrato LFO. The rate is indicated by the
the Rate LED indicator.
Note:
Power Switch
UAD Powered Plug-Ins Manual
These two knobs control rate and depth of the vibrato
effect when CE-1 is in vibrato mode.
Depth Knob
The depth knob controls the intensity of the vibrato ef-
fect.
When in chorus mode, the vibrato controls have no affect.
This switch determines whether the plug-in is active. This is useful for
comparing the processed settings to the original signal, or to bypass
the plug-in to reduce the UAD DSP load (load is not reduced if
2 DSP LoadLock" on page 74
Click the rocker switch to change the Power state.
is enabled).
- 502 -
Chapter 49: Boss CE-1 Chorus Ensemble
"UAD-