Universal Audio UAD User Manual page 507

Powered plug-ins software version 6.1
Table of Contents

Advertisement

The VU is essentially an input meter, therefore it doesn't react when the
Echo/Normal switch is switched from Echo to Normal.
Note:
control. However, like the original hardware, echo intensity (feedback) is ap-
plied just before the level detection circuit. For this reason, the Intensity control
will affect the level readings.
Echo Pan
Reverb Pan
Input Volume
easily induced. However if a cleaner sound is desired, reduce the input vol-
ume below unity and increase the plug-in output volume to compensate.
Mode Selector
only). These modes are faithfully reproduced with the UAD Roland RE-201.
Note:
when both modes are used simultaneously.
UAD Powered Plug-Ins Manual
The Peak lamp and VU meter measure signal just after the input volume
Echo Pan determines the placement of the echo signal in the ste-
reo panorama when the plug-in is used in mono-in/stereo-out
and stereo-in/stereo-out configurations. When the RE-201 is
used in a mono-in/mono-out configuration, this control is dis-
abled.
Reverb Pan determines the placement of the reverb signal in the
stereo panorama when the plug-in is used in mono-in/stereo-out
and stereo-in/stereo-out configurations. When the RE-201 is
used in a mono-in/mono-out configuration, this control is dis-
abled.
This control determines the signal level that is input to the plug-in.
Unity gain is at the 12 o'clock position.
Like the original hardware, clipping distortion at the input to the
plug-in affects the tone of the echo and reverb. Clipping is often
used as part of the desired effect. At unity gain clipping can be
The RE-201 is a combination of a tape echo and a
spring reverb effect. Echo, reverb, or both can be se-
lected with the Mode Selector to determine which ef-
fect(s) are active.
The original Space Echo has three tape playback
heads. By changing the combination and positions of
the heads, a total of 12 different echo variations can be
obtained (4 echo only, 7 echo/reverb, and 1 reverb
The RE-201 uses less UAD DSP in reverb-only or echo-only modes versus
- 507 -
Chapter 51: Roland RE-201 Space Echo

Advertisement

Table of Contents
loading

Related Products for Universal Audio UAD

This manual is also suitable for:

Uad powered plug-ins

Table of Contents