Table of Contents
Advertisement
The Pitch Shift controls are accessed in the
page 306
Decay Optimization improves the Lexicon 224 reverb clarity and naturalness
Decay
Optimization
by dynamically reducing reverb diffusion and coloration in response to input
signal levels. However, if set too high, it can make the decay less even. Decay
Optimization has two control elements: Enable and Amount.
Decay Optimization is factory-optimized for each program and should not re-
quire adjustment in typical use. For this reason, it was deliberately made dif-
ficult to access in the original hardware. However, creative use of the param-
eter is encouraged by making it easier to access in the plug-in.
Decay Optimize
Enable
Decay Optimize
These two adjacent buttons control the amount of Decay
Amount
Optimization. Click the left ("<") button to decrement
the value; click the right (">") button to increment the
value. The available range is 1 through 16. As in the
original hardware, lower values make the result more
prominent.
Note:
cay Optimization Enable control is active.
Mix Controls
UAD Powered Plug-Ins Manual
for access details.
This button enables Decay Optimization for the active program. De-
cay Optimization is active when the button LED is lit. The default
state is ON.
Note:
Decay Optimization is unavailable for P8 Constant Density
Plate A and P9 Chorus.
The Decay Optimization Amount controls have no effect unless the De-
The Dry, Wet, and Solo parameters control the effect
mix in the plug-in. These controls are not available in
the original hardware.
Note:
state does not change when different programs are se-
lected.
Hidden Controls
The Mix controls are global parameters; their
- 305 -
panel. See
Chapter 27: Lexicon 224
Advertisement
Table of Contents
