System Access - AT&T MERLIN LEGEND System Reference Manual

Features

System Access

Extension Programming
Description
Programming Codes:
Assign buttons (centralized telephone
Programming only, factory-set type is Ring):
Intercom or System Access:
Intercom or System Access
Originate Only:
Shared System Access:
Change type of buttons:
Ring:
Voice:
MLX Display Label:
Assign buttons (centralized telephone
Programming only:
Intercom or System Acces:
Intercom or System Access
Originate Only:
Shared System Access:
Change type of Intercom, System Access:
or Shared System Access button:
Ring:
Voice:
System Access is assigned to buttons on all telephones connected to the
system. The function of System Access buttons depends on the mode
programmed for the system.
In the Hybrid/PBX mode, System Access buttons can be used to:
Make an outside call by using an Automatic Route Selection code followed
by a telephone number.
Dial an outside call via a trunk pool by dialing the pool dial-out code followed
by the telephone number.
Make an inside call.
Activate a feature by using a feature code.
Receive inside and outside calls, including voice-announced inside calls.
In the Hybrid/PBX mode, the factory setting for Automatic Line Selection (ALS)
selects a System Access button. Ringing for all types of System Access buttons
is set to Immediate Ring and can be changed to Delayed Ring or No Ring.
*16
*18
*17 + Primary extension
number
**19
*19
SysAccess
SysAcc - 00
S h a r e S y s A c c
Voice Annce, Place,
Ring [Voice, Place, Ring]
Voice Annce, Place,
Voice [Voice, Place
Voice]
System Access 2-349