AT&T MERLIN LEGEND System Reference Manual page 647

Index
Destination button on QCC, 2-287
Dial
Auto, 2-30 — 2-35
Last Number, 2-215 — 2-217
mode for tie trunks, 4-24
Personal Speed, 2-336
Saved Number, 2-329 — 2-332
System Speed, 2-337
Dial By Name with Integrated Solution II (IS II), 3-18
Dial dictation adjunct, hardware description, 5-41
Dial Plan (system numbering) system programming report
for, F-3
Dial-repeating tie trunks. See Wink, immediate, or delay
signaling type for tie trunks, 4-25
Dial tone for tie trunks, 4-24
Dial Tone, Inside (system), 2-207
Dial zero table for ARS, 2-42
Dialed Number Identification Service (DNIS), 4-28
DID trunks, 4-25, 4-26
options and factory settings, 4-26
power failure busy-out, 4-33
system capacities for, 6-3
system programming report for, F-5
Digit absorption for ARS, 2-43
Digital data station, 1-9, 1-12
Digital data via ISDN 7500B Data Module
system capacities for, 6-4
Digital/ISDN (MLX) telephones
features of, 5-10 — 5-14
general programming instructions, B-2 — B-4
MLX-10, 5-14
MLX-10D, 5-13
MLX-20L, 5-12
MLX-28D, 5-11
system capacities for, 6-5
Digital Signal 0 (DS0) channels, 4-27
Digital Signal 1 (DS1 ) facilities, 4-27, 4-32
options and factory settings, 4-27 — 4-32
overview, 1-21
system programming report for, F-6
Digital switch element (DSE) on modules, 4-1, 4-4
Digital switching in control unit, 4-4
Digital tie trunk networking connection, 1-17
Digital-to-Analog modem pool, overview, 1-14
Digital voice and analog data station, overview, 1-12
Digital voice and digital data station, overview, 1-12
Digits
absorb for ARS, 2-43
add for DID trunks, 4-26
delete for DID trunks, 4-26
expected for DID trunks, 4-26
Direct Group Calling. See Group Calling, 2-181 — 2-195
Direct Inward Dial trunks, 4-25, 4-26
options and factory settings, 4-26
power failure busy-out, 4-33
system programming report for, F-5
system capacities for, 6-3
Direct-line console, 2-102 — 2-109
system capacities for, 6-3
Direct Station Selector
specifications and required interface, 5-44
and system programming, 2-282
calling group or CMS supervisor operation, 2-126, 2-127
Extension Status in hotel configuration operation,
2-127, 2-128
feature description, 2-117 — 2-135
hardware description, 5-38, 5-39
message status operation, 2-128 — 2-130
normal call handling operation, 2-120 — 2-126
page button, 2-118
system capacities for, 6-3
Direction for tie trunks, 4-24
Directory, 2-110 — 2-116
Extension, 2-110
labeling the Extension and System, 2-211
lookup with Call Accounting System (CAS), 3-6
Personal, 2-110
System, 2-110
system capacities for, 6-3
Disable, microphone, 2-231, 2-232
Disallowed Lists, 2-136 — 2-139
for Remote Access, 2-315
system capacities for, 6-3
system programming reports for, F-12, F-13
Disconnect Interval, Hold, 2-202
Disconnect time for tie trunks, 4-24
Display, 2-140 — 2-158
general instructions for using features with, C-3
on analog multiline telephones, 2-143
on MLX telephones, 2-140 — 2-143
sample displays, 2-144 — 2-158
Dissipation, heat requirement for control unit, 6-6
Distinctive ring option, 2-324
Disturb, Do Not, 2-159 — 2-161
DLC, 2-102 — 2-109
system capacities for, 6-3
Operator Automatic Hold, 2-202
DNIS, 4-28
Do Not Disturb, 2-159 — 2-161
Drop button
and special characters programming, D-2
with Conference, 2-74
DSO channels, 4-27
DS1 facilities, 4-27 — 4-32
overview, 1-21
options and factory settings, 4-27 — 4-32
system programming report for, F-6
DSE on modules, 4-1, 4-4
I N - 5