AT&T MERLIN LEGEND System Reference Manual page 651

Index
Line Selection, Automatic, 2-36 — 2-38
Line/trunk and station modules
as functional unit, 4-1
hardware description, 5-5 — 5-9
Linear hunt type for Group Calling, 2-183
Lines/trunks, 4-23 — 4-32
labeling, 2-211
system capacities for, 6-3
system programming report for, F-5
types by mode, 4-7, 4-8, 4-12, 4-17, 4-18, 5-6
Listed Directory Number for QCC, 2-290
Lists
Allowed for Remote Access, 2-315
Allowed, 2-22 — 2-24
Allowed, system capacities for, 6-2
Allowed, system programming reports for, F-10 — F-11
Disallowed, 2-136 — 2-139
Disallowed for Remote Access, 2-315
Disallowed, system capacities for, 6-3
Disallowed, system programming reports for, F-12 — F-13
Loads, unit, 6-10
calculating, 6-10
calculation worksheet, H-1 — H-7
for Hybrid/PBX mode, 6-10
for key mode, 6-10
Local area network (LAN) workstation access, 1-14
Local clock reference source for DS1 facility, 4-31
Local exchange tables for ARS, 2-41
Local host computer access, 1-14
Local setting for tie-trunk dial tone, 4-24
Location of control unit, 6-7
Login/Logout (Auto) group type for Group Calling, 2-186
Loop clock reference source for DS1 facility, 4-31
Loop-start lines/trunks, 4-23
Loudspeaker Paging
feature description, 2-250 — 2-260
hardware description, 5-30
ports, system capacities for, 6-4
sample connections, 5-31 — 5-35
specifications and required interface, 5-46
M
Maintenance Busy, Automatic, 2-39, 2-40
Manual completion for One-Touch Transfer, 2-371
Manual Extended Call Completion for QCC, 2-292
Manual Signaling. See Signaling feature description,
2-333 — 2-335
Mean time
between failures for control unit, 6-7
between outages for control unit, 6-7
Megacom 800 — AT&T Switched Network (ASN) service,
4-28
Megacom WATS — AT&T Switched Network (ASN) service,
4-28
Menu hierarchy, system programming, G-1 — G-5
Menu screen on MLX display telephones, 2-141
MERLIN II Release 3 reusable modules, 5-6
MERLIN Attendant, 3-25
MERLIN LEGEND Attendant, 3-27
MERLIN MAIL Voice Messaging System, 3-28 — 3-33
Message Center operation for QCC, 2-293
Message center with Call Accounting System (CAS), 3-6
Message Drop with AUDIX Voice Power — IS II (AVP), 3-17
Message Status
button on DSS, 2-128, 5-38
operation on DSS, 2-128, 2-130
Message-Waiting indicator
on single-line telephone, 5-41
specifications and required interface, 5-46
Message-Waiting receiver
fax 2-222
Group Calling, 2-184
Messaging, 2-220 — 2-230
Leave Message, 2-221, 2-222
posted messages, 2-223
receiving messages, 2-222, 2-223
Send/Remove Message, 2-221
Send/Remove Message button on DLC, 2-102, 2-288
MF classification for FCC registration
Hybrid/PBX mode, 4-15
in Behind Switch mode, 4-21
in Key mode, 4-11
MFM
adjuncts used with, 5-21
feature description, 2-233 — 2-239
hardware description, 5-20, 5-22
programming requirements, 2-234, 2-235
used as Supplemental Alert Adapter (SAA), 2-234
used as tip/ring interface, 2-233
Microphone Disable, 2-231, 2-232
Miscellaneous accessories, 5-53
Missed Reminder button, 2-310
MLX telephones
features of, 5-10 — 5-14
general programming instructions, B-2 — B-4
MLX-10, 5-14
MLX-10D, 5-13
MLX-20L, 5-12
MLX-28D, 5-11
system capacities for, 6-5
Mode codes, voice messaging systems, 3-5
Mode, dialing for tie trunks, 4-24
Mode, signaling for DS1 facility, 4-32
Modem pools, 1-12 — 1-15
as data communications feature, 1-16
Modems
and modem pools, 1-12
Features, 5-28
hardware description, 5-27, 5-28
overview, 1-9
specifications and required interface, 5-46
Modes
I N - 9