AT&T MERLIN LEGEND System Reference Manual page 653

Index
Park, 2-255
Park (Call) Return Interval
Park zone codes
system capacities for, 6-3
Park zones for operators, 2-255
Parts information, A-1 — A-9
Password, Night Service, 2-243
PC and system programming, 2-283
Personal computer (PC) and system programming, 2-283
Personal Directory, 2-110
system capacities for, 6-3
Personal lines, 2-261 — 2-266
principal user and Coverage, 2-83, 2-171, 2-261
principal user and Remote Call Forward, 2-171, 2-261
system capacities for, 6-4
Personal Speed Dial, 2-336
as a data feature, 1-16
system capacities for, 6-4
Personalized ringing option, 2-325
PFT
alarm, 4-33
feature, 2-276
jack, 2-276, 4-37, 5-53
telephone, 2-276, 4-37, 5-53
telephones, system capacities for, 6-5
Pickup, 2-267 — 2-271
Group, 2-268
system capacities for, 6-4
system programming report for, F-22
Pool button, 2-272
system capacities for, 6-4
Pool dial-out code restriction, 2-60
Pool Status button on QCC, 2-289
pools, 2-272 — 2-275
and Hybrid/PBX mode, 4-12 — 4-14
system capacities for, 6-4
Ports, system capacities for, 6-4
Position Busy button on QCC, 2-288
Positions, system operator
direct-line console (DLC), 2-102 — 2-109
maximum number of, 2-105, 2-294
queued call console (QCC), 2-285 — 2-305
system capacities for, 6-3
types of telephones used, 5-17, 5-18
Posted messages, 2-223
labeling, 2-211
Power accessories, 5-48, 5-49
auxiliary power units, 5-49
battery backup, 5-48
telephone power units, 5-48, 5-49
Power and grounding requirements, 6-8 — 6-10
Power failure
alarm, 4-33
DID busy-out, 4-33
jack, 2-276
telephone, 2-276
Transfer feature, 2-276
transfer jack, 4-37, 5-53
2-255
r
transfer telephone, 4-37, 5-53
transfer telephones, system capacities for, 6-5
Power requirements for control unit, 6-7
Power supply module
and unit loads, 6-10
as functional unit, 4-1
hardware description, 5-3 — 5-4
Power supply, uninterruptible, 5-48
Primary clock synchronization for DS1 facility, 4-31
Primary Individual Coverage, 2-84
Primary Rate Interface (PRI), Integrated Services Digital
Network (ISDN) type of DS1 facility, 4-28, 4-29
Prime Line buttons in Behind Switch mode, 4-19
Principal user of personal line
and Coverage, 2-83, 2-171, 2-261
and Remote Call Forward, 2-171, 2-261
Print reports, F-1 — F-22
Priority, elevate within QCC queue, 2-291
Privacy, 2-277 — 2-279
as a data feature, 1-16
Processor module
as functional unit, 4-1
hardware description, 5-4, 5-5
Product ordering codes, A-1
Programmed buttons, general feature use instructions for,
C-1, C-2
Programming, 2-280 — 2-284
centralized telephone, 2-281
extension, 2-280
general telephone programming instructions, B-1 — B-4
special characters, D-1, D-2
system, 2-281 — 2-284
system menu hierarchy G-1 — G-5
system programming console overlay, E-1 — E-2
system reports F-1 — F-22
Protection accessories, 5-49 — 5-53
Pulse amplitude modulation (PAM), 4-3
Q
QCC
system capacities for, 6-3
Quantizing in control unit, 4-3, 4-4
Queue
calls. See Callback, 2-53 — 2-59
Queue Over Threshold for QCC, 2-292, 2-293
Queue priority, elevate, 2-291
Queue priority for QCC, 2-290
IN-11